Release Notes 2.32

Release Date

Mobile app: 

2025-01-10

Bug fixes. 

Hub and API:

2024-12-30

Bug fixes.

New Features

Key	Summary	Description
IBALDEV-6011 IBALDEV-6012	Mobile app: Add "Partially successful" status for product level failures Hub: Add "Partially successful" status for product level failures in POD history	With product-level failures on the Create POD page, it is possible to mark a product as undelivered by unclicking/de-selecting it from the list. A prompt will be displayed to choose a failure reason code and specify the failed quantity. See more details on product-level failures. Previously, marking a product as undelivered would automatically assign it a "Failed" status, regardless of the number of failed quantities. Now, you can specify the failed quantity, for example, 5 out of 10 planned, and the failure reason code, along with the failed quantity, will be highlighted in orange colour on the product card. The product will be assigned a "Partially successful" status. If the entire product quantity is marked as failed, the failure reason code will be highlighted in red colour on the product card, and the product will receive a "Failed" status. These updates also apply to the POD details page. For products linked to packages, this functionality was already introduced in the 2.31 release.
IBALDEV-6020	Mobile app: Changes in field "Number of packages/planned" on Create POD page	The "Number of packages / planned" field on the Create POD and POD details pages has been renamed to "Successful packages / planned". If a consignment has no pre-defined packages, this field is editable, allowing you to input values, e.g. 4/6 to indicate 4 successfully delivered out of 6 planned. Once packages are added or scanned, the field becomes read-only and updates to show the added or scanned count. If the planned package total is set for a consignment via the Hub or API, the field is also read-only, and adding or scanning packages is limited to the planned total number. For consignments with pre-defined packages, the field displays the total count, such as 2/2 or 3/3. In any case, if packages are unselected during POD creation to mark them as undelivered, the "Successful packages / planned" field adjusts accordingly, e.g. 3 successful out of 6 planned. Partially successful packages are counted as failed. See more details about the line-level failures.
IBALDEV-5084	Mobile app: Display depot info for ad-hoc vehicle check in history	When you create an ad-hoc vehicle check for a specific vehicle, the depot information is taken automatically from this vehicle. Each vehicle is linked to a depot in Hub → Environment settings → Vehicles. On the Vehicle check details page in the mobile app, the assigned depot will now be displayed, replacing the previous "No depot info" message.
IBALDEV-5812	Mobile app: Change layout for Activate email page	After registering a new account with an email and password, you have to verify your email address. In the mobile app, if the email is not verified, you will see the following message: "Please check your email, follow the activation link, and reload the page." At this point, an email with a verification link will be sent to you. If you choose not to verify your email, you still have the option to sign out from your account.
IBALDEV-6122	Hub: Load building time windows option	With the previous 2.31 release, we introduced load optimization considering consignment time windows, the "Required from" and "Required to" fields in a consignment. See more details about load optimization with time windows. This functionality is now extended to the Load building feature. When you select consignments on the Consignments page and click the Load building button, a prompt will appear with a new checkbox "Consider time windows." If the selected consignments have required time windows, you can enable this option. Once loads are generated using the Load building functionality, the system will automatically optimize them by factoring in the time windows of the assigned consignments. After the optimization is complete, you still retain full control over the load. You can manually adjust the stop sequence by dragging and dropping stops as needed. Once you are satisfied with the adjustments, simply press Save to apply automatic recalibration.
IBALDEV-5983	Hub: Environment settings -> Vehicles - add gross weight and dimensions	The layout of the Add vehicle dialog in Environment settings → Vehicles has been improved. The most important and required fields, such as Key, Registration, Speed factor, Depot, Vehicle categories, Description, and Available for load building, are now displayed first. To access vehicle dimensions, click the Measures button, which expands the dialog to show additional settings such as Weight and Volume capacity, and Emissions factor. See more details about vehicle properties. This update also introduces new fields: Gross Weight, Height, Width, and Length. These dimensions can now be provided to run load optimization and calibration by considering vehicle restrictions. The system will factor these dimensions into route building to generate the most efficient outcomes, for example, to avoid bridges with height restrictions, narrow roads unsuitable for wider vehicles, or areas with weight limits that could affect the selected route. Additionally, hovering over the question mark icon next to each field provides more details about its purpose and the expected data input. To quickly update your existing vehicles, use the Import button. In the Import spreadsheet, you can include vehicle dimensions as well. Once ready, press Import and select the "Existing vehicles will be updated" option. The system will match vehicles based on their key values and update their details accordingly.
IBALDEV-6112	Hub: Load calibration/optimization with vehicle restrictions	In Environment settings → Vehicles, you can now enter values for the new vehicle properties: Gross weight, Height, Width, and Length. Based on the dimensions of the vehicle assigned to a load, running load calibration or optimization — whether or not consignment time windows are considered — will create the most efficient route. For example, the system can avoid bridges with height restrictions, narrow roads unsuitable for wider vehicles, or areas with weight limits that might impact the route. Vehicle restrictions are not yet automatically applied to optimization for loads generated through the Load building feature. This improvement is planned for one of the upcoming releases. See more details about load optimization and calibration.
IBALDEV-6025	Hub: Map view - Create load from map selection	You can manage multiple loads simultaneously by selecting them on the Loads page and clicking the Map view button. On the Map view page, you can also add unassigned consignments to the No load card. See more details about Hub: Map View. Additionally, you can now select stops directly on the map — regardless of whether they are assigned to existing loads — and click the Create load button. After filling in the necessary load details on the dialog, such as Key, Trip, Status, and Planned start, click Create to generate a new load with the selected stops. The new load will then appear on the map. If any of the selected stops belong to existing loads, you will be prompted to confirm whether you want to move those stops to the newly created load.
IBALDEV-6024	Hub: Map view - When consignments are removed from a load, keep them in the No Load card	On the Map view page, if you remove consignments from their assigned loads, they now will be kept under the “No load” card and still displayed on the page. Thus, you can continue working with them — either to create a load for them or move them to one of the existing loads.
IBALDEV-6021	Hub: Environment settings -> Devices - add "Record time at stop"	A new setting "Record time at stop" is now available under Environment settings → Devices. By default, it is disabled for all environments. This setting is designed to support a future feature in the mobile app to record the actual time spent at a stop. The feature is scheduled to be introduced in one of the upcoming releases.